Skip to content

Aerosmith On Tour With Lectrosonics Gear

Share this Post:
Jim Survis with a Lectrosonics transmitter

LAS VEGAS — Aerosmith is touring again this summer, and to ensure onstage mobility, both lead guitarist Joe Perry and rhythm guitarist Brad Whitford are performing with six Lectrosonics IS400 Wireless Beltpack Instrument Systems. Jim Survis, pictured here, is guitar tech for Joe Perry and crew chief for Aerosmith. Survis, who has worked with Perry for the past 17 years, was in the market for new wireless equipment.

“We were very concerned about changes in the FCC regulations,” Survis said, “and this prompted us to get equipment we knew would be fully operative with the frequency changes that have been allotted for this type of wireless application. It was very important to us that our RF gear be fully compliant with the new regulations.

“In the process of looking around and investigating, I went to see AC/DC and spoke with Malcolm Young’s guitar tech, Geoff “Bison” Banks, who highly recommended Lectrosonics gear,” Survis said. “I was equally concerned that, whatever gear we selected, it had to deliver excellent sound quality. During my conversations with Geoff and others, I heard nothing but good stuff about Lectrosonics.”

Acquired in early June and placed into service on the first tour date at mid month, Perry is now outfitted with four Lectrosonics IS400 Wireless Beltpack systems, enabling him to easily change guitars during performances, while Whitford is equipped with two. Each IS400 wireless setup includes the R400A receiver and an LMa Digital Hybrid UHF beltpack transmitter. Completing the system package is the Lectrosonics MI39A instrument cable that connects the guitar’s output to the transmitter.

The systems on tour with Aerosmith employ Lectrosonics’ Digital Hybrid Wireless technology, which uses a proprietary algorithm to encode 24-bit digital audio information with no compression and low distortion into an analog format that can be transmitted in a robust manner over an analog FM wireless link.

Lectrosonics said its technology allows for a higher dynamic range than other wireless systems, touting improvements in operating range, signal decay, and allowing for a small spectral footprint, enabling more channels to be operated simultaneously.

Survis discussed several aspects of the IS400 wireless systems.

“Since we’re constantly travelling,” said Survis, “it was important that our wireless gear make it easy to identify available frequencies in each new location. The Lectrosonics equipment certainly meets that requirement and it’s just as simple to make the required changes. With the touch of a single button, the system scans for available frequencies and when it finds one, another press locks it in and you’re good to go.

“I’ve also been really impressed with the range these systems provide,” Survis added. “I’m not using any booster antennas and I’ve never experienced a dropout. Also, the IS400 has a function that enables us to hot swap equipment, and this has proven invaluable.” Survis is referring to Lectrosonics’ Smart Squelch feature, which eliminates “pops” that can occur through loudspeaker systems when turning transmitters on and off.

“Everything’s been working really well and everyone involved is very pleased with the equipment’s sound quality, range, and ease of use. On several occasions, Joe has mentioned how pleased he is with his sound this tour and Lectrosonics is a big contributor to that. That says a lot.”

For more information, please visit www.lectrosonics.com.