AMSTERDAM, NETHERLANDS – ISE, one of the most important international trade fair for events and installation products, is approaching. Like every other year, WORK PRO will participate with the aim to introduce new and enhanced solutions, developed by the brand during the last year, with the certainty that these new references will help professionals in their shows and installations.
More details from WORK PRO (www.workproaudio.com):
Attendees who will pass by Hall 7 Booth M 190 will find out the new SERIES of SMART SPEAKERS:
SCPRO 4A – Integrates a 2x15W amplifier, monitor output and Bridge and Dual modes.
SCPRO 4BT – Presents the same features as SCPRO 4A, but adding Bluetooth connection.
SCPRO 4BL – Presents Blueline integration (receiver), 2x5W amplifier, PoE supply, remote control (BLC1) and Bridge and Dual modes.
The three models can be connected to 3 passive speakers in serial (2 in L and 1 in R ) and can increase the number of installed devices from 1 to 4 speakers.
ISE will also be the backdrop for the presentation of the new MD 82 AX, an 8 channels digital mixer (unbalanced inputs), that incorporates advanced features as Automixer (it allows to mix the signal value according to others) and RS485 interface, for external commands. Other interesting features of the MD 82 AX are the three tone controls, high pass filter and low pass filter (is possible to adjust the frequency) and controls the anti-feedback (4 levels), that allows optimization of the installation, and provides it with multiple control capabilities. Every input gets phantom supply for microphones (+48V).
Visitors will discover the WFS 10 CX, an outdoor speaker. This audio projector has been designed for appliances, as fun parks, sport stadiums, entertainment complexes, thanks to its elevate IP range (IP 55). It incorporates a 10” coaxial transducer and a 1” compression driver with a remarkable high 
sensitivity (104 dB) and a 300W Continuous program and a cabinet that is made from fiberglass. Its 90°x90° directivity in most of the band, facilitates the contractor’s job, designing the installation with the adequate audio dispersion. Its 2 connectivity modes (low impedance 8Ω and 100V line) allows setting the devices to several acoustic solutions.
Another new technology is the new WPS 310, a pendant speaker, that ensembles a coaxial transducer (10”+1”) and provides high technical features, as 500w @ 8Ω, being the perfect choice for rooms and spaces where the design is a rule like lounges, bars or hotels.
The amplification field shows different new technologies, as the new PA 1254, a 4 channels amplifier (19”), that offers 150W per channel and it can be configured between 9 presets, of which may be: 1 (3/4 bridged), 2 stereo, 3 (2.1) and 4 independent channels. On the 2.1 mode, the user can configure the low pass filter for the subwoofer and the outputs for the satellites with high pass filters which the PA 1254 incorporates.
PA 100 and PA 100 MX are small amplifiers that offer 100W power, and can be controlled by RS485 protocol and work remotely. The PA 100 MX also incorporates really interesting features as Anti-Feedback, Auto-Gain, Mono or Stereo and 100/70V – 8/16Ω selector.
WORK PRO commercial and technical staff will be on hand for personalized demonstrations of the wide range solutions.
