Skip to content

Blogs

RF Venue Wireless Accessories

RF Venue Wireless Accessories

RF Venue offers a range of accessories to optimize the performance of any pro wireless system. The CP Beam™ antenna (left in photo) is a circularly polarized beam antenna designed for long range operation with wireless microphone systems, IEMs and other UHF devices from 468 to 740 MHz and 950 MHz. The RF Spotlight,™ a 19-inch diameter hemispherical antenna, is designed to be used on a floor in conjunction with wireless mics, IEMs, IFB or other 468 to 740 MHz units. The Diversity Fin™ antenna, intended for use with wireless 468 to 740 MHz UHF receivers, incorporates dual branch diversity reception and makes use of orthogonal, directional LPDA and bidirectional dipole elements for improved performance.

Read More »
Polar Focus GK-SFA Genie Kit

Polar Focus GK-SFA Genie Kit

Designed for portable use, the GK-SFA combines Polar Focus’ XY Grid system and the aiming of its Spine Frame Adapter to let users precisely aim their line array from a Genie (or similar) tower. The Spine Frame Adapter (lower half of assembly) provides infinitely adjustable tilt control to any line array that uses the common front-to-back “spine” support frame. The line array tilt is adjustable under full load with a 9/16-inch wrench, and can be locked down. The pan angle of the line array is controlled and adjusted by a heavy-duty friction bearing. The working load limit is 637 to 1,000 pounds depending on the arm separation spacing.

Read More »
Peavey MediaMatrix Claro Processor

Peavey MediaMatrix Claro Processor

Offering powerful audio processing/control for a wide range of applications, Claro provides 12 balanced inputs, each mic or line configurable (including phantom power) and four line outputs. Inputs/outputs are on Phoenix Euroblock connectors. The rear panel has 12 GPIO’s, RS-485 and RS-232 connections and multiple Ethernet ports for interconnects/control. A complete range of DSP mixing, routing and processing functions — such as EQ, filters, delays, compressor/limiters, AEC, meters and test signal generators — are accessible/controllable via an external GUI. Up to four Claro frames can interconnect for up to 48 inputs/16 outputs.

Read More »
Movek myMix Install

Movek myMix Install

Movek has unveiled Install, a version of its popular myMix controller designed for permanent or custom installations. Like the portable model, myMix Install has two mic/line inputs with phantom power and a stereo mix output as balanced line level. This allows signals to come in and out of the audio network on any device, wherever it is needed. Stereo mixes can be sent back to the network and used from any other myMix device like any stereo signal. myMix Install allows for desk mounting or an optional in-wall box.

Read More »
Line 6 Relay V75-SC Wireless Mic

Line 6 Relay V75-SC Wireless Mic

Line 6 expands the versatility of its XD-V75 digital wireless system with the Relay V75-SC, a 14-channel digital wireless handheld transmitter with supercardioid dynamic capsule. The V75-SC offers 24-bit audio, a 10 Hz to 20k Hz response and a dynamic range of up to 118 dBA. Users can also choose from four digitally modeled microphone flavors, for a variety of sonic textures, and the system includes both black and chrome windscreens to match user preferences.

Read More »
FiberPlex FOI-6010

FiberPlex FOI-6010

Designed as the true “Swiss Army Knife” of fiber optic transport, the FOI-6010 can be used with any combination of FiberPlex or third party SFP/SFP+ (Small Form-Factor Pluggable) optical/electrical modules. Users can quickly adapt the FOI-6010 to their system using various interchangeable plug-in modules, including: optical standard duplex to single fiber bidirectional (BiDi) transport; fiber optic repeater; multimode to single-mode converter; 10/100/1G Ethernet to duplex or BiDi optical; ASI, SD-SDI, 3G-SDI to duplex or BiDi optical; HDMI/DVI to duplex or BiDi optical; and MADI to duplex or BiDi optical.

Read More »
Audio-Technica ATM610a/S Handheld Mic

Audio-Technica ATM610a/S Handheld Mic

A variation on A-T’s successful ATM610a, the new ATM610a/S hypercardioid dynamic handheld microphone features a lockable MagnaLock on/off switch design providing silent on/off operation. The ATM610a/S is designed for applications when users need to control their own mic, such as when an engineer is not present, or as a high-quality talkback mic. It also features a rugged, all-metal design; excellent internal shock mounting and a rare earth magnet for articulate vocal reproduction. MAP is $149.

Read More »
Amadeus Relaunches UDX Series

Amadeus Relaunches UDX Series

Thirty years after the original, French-based Amadeus relaunches its classic UDX series, in four models updated with new 8/10/12/15-inch coaxial neodymium transducers, used alone or with the company’s ML 15 and ML 18 subwoofers. No longer “just black,” UDX are now offered in 30 colors with several cloth grill choices. Multiple M8 threaded fly points accommodate optional yoke, pole and wall mount brackets. Onboard passive crossovers use high-end components and presets for popular digital crossovers (XTA, Xilica, Lake, BSS, etc.) are available.

Read More »
FOH 2013 August Buyers Guide - Channel Strips

Channel Strips

Originally designed for studios, channel strips — in this case, single-channel units offering a mic preamp, EQ, dynamics (and sometime more) — have become popular with sound reinforcement users. Besides adding a different flavor to your mix, these are an ideal solution for putting a little “frosting on the cake” for that featured performer’s “money channel” or a bit of analog warmth, punch or sizzle to your console. The trend is on the rise and we found plenty to choose from, for any budget. Check ‘em out!

Read More »
Bag End CD-12

Bag End Introduces Its New CD-12 Time-Align Speaker

LAKE BARRINGTON, IL – Bag End Loudspeakers has introduced the CD-12 Time-Align as part of its Venus series, which Bag End describes as the smallest and lightest yet most powerful speakers available. The first in the new series –– the CD-15 –– wowed sound engineers when it was used at a performance stage at the NAMM Show earlier this year.

Read More »
HAN-ECO_Multipin_System

MonoCAT from Sommer Cable

Sommer Cable’s fully reworked and unified MonoCAT cable range includes various hybrid cables that all contain network lines complemented by signal or power supply elements. This allows connecting digital sound, light or video control desks using only one cable and, as the case may be, with only one plug-in procedure, well suited to conference center installations and OB van applications.

Read More »

Waves Audio MultiRack Version 9.5

Waves Audio’s MultiRack Version 9.5 updates MultiRack with a new graphic interface along with the ability to record to two computers simultaneously. Version 9.5 also features 1000 snapshot support for DiGiCo consoles and the ability to run most Waves Signature Series plugins on MultiRack Native or SoundGrid systems.

Read More »