Alcons’ BC332 self-contained, high-output cardioid subwoofer system is designed for both permanent and portable ground-stacked applications. Like the bigger BC543, the BC332 is designed to offer a directivity controlled, high output, tight and accurate sub-bass response for low-frequency extension of any Alcons pro-ribbon system.
Read More »
Behringer announced the availability of its Eurocom AX Series amplifier control software, which is designed to allow integrators to set up, control and monitor all Eurocom AX Series DSP models with a local PC via the front panel USB connector, or remotely over a network via the rear panel Ethernet port. A front panel LCD display also allows setup and adjustments directly at the amplifier; no PC required.
Read More »
Grundorf’s new Tour 8 Series Snake Racks are designed to serve as a road worthy mobile / touring solution for musicians and audio professionals. They are available in 12-, 16-, 18-, and 20-space configurations. Along with a rack-mountable snake box, these cases also have a compartment on the utility side of the enclosure to house the snake reel.
Read More »
Eventide announced that its H3000 Factory Ultra-Harmonizer plug-in for AAX, VST, and AU, featuring 64-bit support, is now available for download. Eventide also recently announced the availability of Omnipressor, 2016 Stereo Room and Blackhole native plug-ins. All special introductory pricing ends at midnight, Nov. 23, 2012.
Read More »
Galaxy Audio’s Nano Spot is the smallest member yet in the company’s Hot Spot line of products. Well suited for small reference monitor applications or for use in call centers, bar or patio settings, the Nano is designed to be inconspicuous yet powerful. The powered Nano Spot is portable, weighing less than 2 pounds. The NSPA features a 3-inch driver powered by a 25 watt amplifier. With three inputs on the rear panel (XLR, ¼”, and 1/8” summing) users can go directly into the Nano Spot from any source or microphone.
Read More »
Community Professional’s second generation VERIS (VERsatile Installation Systems) Series is a new range of two-way, three-way and subwoofer designs created for demanding installed sound reinforcement and playback applications. Enhancements include new design 1-inch exit HF drivers, improved crossovers and a V2-215S dual 15-inch sub. Compact models include single/dual six-inch and eight-inch enclosures; larger two-way and three-way systems with 12/15-inch woofers are intended for mid-sized to large spaces and available for short-, mid- and long-throw applications. A variety of subwoofers are offered.
Read More »Line 6 announced that the free v2.1 firmware update for POD HD500, POD HD Pro and POD HD are available immediately for download at line6.com. This firmware update provides five new HD amps—bringing the total HD amp count to 30—as well as new performance options.
Read More »
The new L1 Model 1S 12-speaker Articulated Array® column provides 180-degree horizontal coverage. The system’s four lightweight pieces can be set up/broken down in minutes without speaker stands or wires. An integrated ToneMatch® port offers a single-cable digital/power connection to the optional T1 ToneMatch audio engine with four input channels with a selection of ToneMatch presets and effects. An optional B2 powered Bass Module with dual 10-inch woofers expands LF performance.
Read More »
The SM-80 is designed to provide loud, highly articulate sound in a lightweight, pole-mountable package that’s just 65 pounds. It offers 80×80-degree coverage from 110Hz to 20kHz, handles 400 Watts continuous (1,600W peaks) and can be paired with Danley TH-series subs for full-range performance. The 12-inch coaxial speaker is housed in a Baltic birch cabinet that’s 25.5 by 24 by12.75-inches (HxWxD). MSRP is $2,999.
Read More »
The Konfigurator2 software package provides a manufacturer-independent loudspeaker library for configurating and monitoring Hoellstern amplifiers over an RS-485 network. Operating on PC and Mac platforms, the simple drag/drop software lets users create networks, incorporate Hoellstern amps and access DSP elements like filters, delays and limiters. The PC version ships this month, with Mac software slated for November release.
Read More »
The culmination of years of work pursuing the perfect linear power amplifier, the S Series uses MC2 Audio’s complementary AB bipolar output stages, combined with a unique current-driven floating drive stage. Sophisticated “side-chain” limiters prevent speaker damage and distortion and stay out-of-circuit until the onset of clipping. The S Series has two models: the S800 and S1400. Both feature shielded toroidal power supplies and intelligently controlled, low-noise fans.
Read More »
Movek has upgraded its myMix Control plug, which adds network control of the myMix personal monitoring and multi-track recording system. Using an improved browser-based GUI (accessible via Wi-Fi to Mac/PC laptop, iPad, etc), the Control option streamlines the configuration and support for larger systems used in concert sound and large commercial sound applications. Operations include editing and archiving of set-ups, while offering engineers more control over performer or installation settings and simplifying global profile and scene changes.
Read More »