REGGIO EMILIA, Italy — Recent additions to RCF’s TT+ Touring and Theatre line, including the company’s TT22-A II, TT25-A II and TT25-CXA speakers, are now shipping.
More details from RCF (www.rcf.it):
The design philosophy of the latest products in the TT+ Series is based upon offering ready-to-use solutions and tools to the sound engineer. A key advantage is the ability to sustain very high power with efficient sound pressure levels. Intense sound levels are created with remarkably high definition and extended dynamic range.
The TT22-A II, TT25-A II and TT25-CXA speakers are exceptionally lightweight, made of modern construction materials and easy to move and transport. Thanks to the new algorithms developed by RCF R&D Department and the on-board DSP, they ensure a very precise response curve across all frequencies.
Two independent digital amplifiers — 800 W low frequencies, 300 W for the high frequency driver — deliver an astonishing output power making the TT22-A II, TT25-A II and TT25-CXA powerful, accurate and efficient. Our class D amplifiers offer hi-fi sound, extremely low distortion with negligible quiescent noise and stable burst response.
The amplification module is housed in a separate chamber and mechanically insulated from the cabinet’s vibration, for maximum reliability in the long term. Thanks to the incredible efficiency of our amplifiers, no fans are needed for a very quiet functioning. A newly developed algorithm offers constant linearity from very low level signals to the maximum amplifiers’ output. The speakers feature a 32-bit floating-point DSP with 48 KHz.
The HF transducer is a high-performance diaphragm compression driver with a 1.5 inch exit throat featuring several state-of-the-art technologies. The new woofers of the TT22A-II, TT25-A II and TT25-CXA models offer an extremely fast and accurate bass response and a natural and neutral mid-range response. A very strong neodymium magnetic structure guarantees good dynamics and precision, while a new and unique 3.5” voice coil provides a very high power handling — especially if compared to standard voice coils.
The TT25-CXA II horn on a coaxial transducer exhibits constant Q. Frequency response is uniform across the specified beam width, with minimal side lobes. The compact enclosure houses a coaxial 15-inch neodymium cone driver and a 64mm diaphragm compression driver, along with phase-corrected control electronics and amplification.
The TT22-A II, TT25-A II and TT25-CXA speakers are exceptionally lightweight, for easiness of transport and installation. Their compact size facilitates usage for several different purposes. The cabinets are made of high quality Baltic Birch plywood, and are completely waterproof and highly resistant to scratches and bumps thanks to a special adhesive material and polyurea paint. The internal structure is heavily braced to survive long term use and transportation.
Two large metal brackets on the TT22-A II and TT25-A II ensure safe rigging. The cabinets feature top M20 insert, pole mount, top and bottom fly tracks, side quick-lock pins and rigging points.
The TT25-CXA features an aluminium top handle and a side pole mount. Both are designed to facilitate transport, positioning and loading operations.
Every model is equipped with a rear encoder allowing the selection of input gain reduction, speaker delay setting, and a whole set of 8 presets. The presets are of three types:
- – Close, when the listening distance is < 4 m
- – Linear, when the listening distance is from 4 to 11 m
- – Far, when it is more than 11 m The TT25-CXA also allows to choose between the single or double monitor preset.
The TT22-A II, TT25-A II and TT25-CXA have RDNet onboard. Using the RDNet protocol it is possible to monitor all the system’s parameters, from the input to the status of each single amplifier.
With the integrated DSP board of each unit, it is easy to address specific presets to single cabinets or groups of cabinets via the RDNet GUI software. Changes of parameters like gain, equalization or delay can also be made.
TT22-A II
Active High Definition Two-Way Speaker
p/n 130.00.444 (230V) / 130.00.445 (115V)
- – 1100 W Class D amplifier
- – 90 x 60 constant directivity coverage angle
- – 12” neo woofer, 3.5” voice coil
- – 15” neo c. driver, 3.0” voice coil
- – DSP processing
- – Onboard RDNet control
- – Multifunctional cabinet
- – Very high output
TT22-A II is a 2-way active system featuring a 12” neodymium woofer, 86 mm voice coil in a bass reflex configuration and a 1.4” exit, 75 mm voice coil neo compression driver.
An extremely careful acoustic design plus the highest quality transducers and a powerful amplifier make the TT22-A II speaker system the perfect solution from live sound situations to playback and monitoring. The amplifier section features 1100 watt power — 800 watt low frequency, 300 watt high frequency. The cabinet is made of marine Baltic birch plywood and features high-resistance polyurea coating. The cabinets has 2 side handles, 6 x fly-track rigging points, quick lock pin receptacles and a steel pole mount.
TT25-A II
Active High Output Two-Way Speaker
p/n 130.00.446 (230V) / 130.00.447 (115V)
- – 1100 W Class D amplifier
- – 90 x 60 constant directivity coverage angle
- – 15” neo woofer, 3.5” voice coil
- – 15” neo c. driver, 4.0” voice coil
- – DSP processing
- – Onboard RDNet control
- – Multifunctional cabinet
- – Very high output
The TT25-A II is the most flexible and powerful tool in its class. TT25-A II offers very high output and dynamics, and extreme linearity and accuracy in a compact size.
TT25-A II is a 2-way active system featuring a 15” neo woofer, 86 mm voice coil in a bass reflex configuration; 1,5” exit, 75 mm voice coil neo compression driver; 90° x 60° constant directivity horn, 90° rotating. The TT25-A II is the ideal professional speaker for sound reinforcement, live performances and events.
TT25-CXA
Active High Output Two-Way Speaker
p/n 130.00.448 (230V) / 130.00.449 (115V)
- – 1100 W Class D amplifier
- – 60 x 60 constant directivity coverage angle
- – 15” neo coaxial woofer, 3.5” voice coil
- – 15” neo coaxial c. driver, 2.5” voice coil
- – DSP processing
- – Onboard RDNet control
- – Multifunctional cabinet
- – Very high output
The TT25-CXA is a full range, high performance coaxial monitor. The linear response curve, the consistent coverage and acoustic output make the TT25-CXA II the professional choice for most demanding situations.
The voicing is accurate and deep, the sound is transparent in the mids and extremely accurate at very high frequencies. The size is compact and the profile is very low for a discreet appearance. The TT25-CXA is a high power active system that sets a new standard in the touring and theatre sound reinforcement. By producing flat amplitude and phase response, full-range bandwidth and exceptional impulse response, the TT25-CXA far exceeds the capabilities of conventional stage monitors.
