Skip to content

dB Technologies Theater Series Stage Monitors

Share this Post:

Italian loudspeaker manufacturer dB Technologies presents its high-performance DVX TH “theater” series stage monitors. The initial introduction includes the DVX-DM12 TH and DVX-DM15 TH active two-way stage monitors. Each high-output, 136 dB max SPL speaker pairs 12” or 15” neodymium woofers with 1.4” exit HF neo compression drivers. The cabinets feature rotatable HF driver (for left or right configuration), double EQ preset, input and output panels on either side with universal switch mode power supply. Response of the DVX-DM12 TH is 63 Hz to 16k Hz; the DVX-DM15 TH is 55 Hz to 16k Hz.

For more info about dB Technologies, go to www.dBtechnologies.com.

A unique feature of the TH series monitors is the ability to rotate the front panel to configure the monitor with the horn on the right or on the left for stage positioning and stereo configuration purposes. In addition, the 90×40 horn can be rotated for proper pattern coverage.

Utilizing the latest in amplifier technology from dB Technologies, the TH series incorporates a two-way Digipro G2 amplifier, which splits the power and delivers 750-watts RMS to the LF section and 375-watts RMS to the HF section. The Switched-Mode Power Supplies and PFC (Power Factor Correction) technologies assure operation with supply voltages between 100 and 240 VAC, ensuring the same performance even with floating and non-stabilized power sources.

The linear response and accurate frequency response allow the TH series to be used on stages large or small, wherever high levels of performance are required. A selector located on the input panel allows to choose between two preset equalizations – EQ Flat and TH EQ.

Cabinets are constructed of heavy-duty 15-mm multi-layer birch, painted with a black polyurea for ruggedness and roadworthiness. All inputs (Powercon and XLR input) are located at one end with the links (Powercon and XLR output) at the opposite end for ease of pass-through connectivity. The input section also includes LED indicators monitoring the internal limiter circuit, amplifier status, power voltage, input sensitivity and audio signal presence. Two recessed side handles facilitate transport.