Skip to content

1 SOUND Introduces their New ‘Banquet Sub,’ SUB28

Share this Post:

1 SOUND announced their new SUB28, calling it the “Banquet Sub” at ISE Barcelona. The 1 SOUND team explained the inspiration stemming from interior designers’ and architects’ specifications on banquets and this is their response to fit their specs while aiding to the subwoofer’s sonic quality and SPL capability.

More details from I SOUND (www.1-sound.com):

The SUB28 is a powerful, low-profile bass enclosure with a high SPL incorporating two front-loaded 8-inch woofers. In addition to offering excellent low end down to 45 Hz, this subwoofer provides a very precise and rapid transient response, for both deep and punchy bass sound. The SUB28 stands less than 8 inches tall allowing it to be positioned underneath, inside, or in between furniture. Eight M8 rigging points, four on each of two sides, and an optional hanging kit allow this sub to be flown in two different orientations, either parallel to a wall or to a ceiling. This subwoofer was designed and tested to be a powerful subwoofer that will not jump and move when playing at higher volumes. The recessed input and link output connectors on two of the corners permit clean cable management, so the subwoofer can be positioned flush against a wall. The SUB28, like all 1 SOUND loudspeakers, is available in various colors and finishes with a short turnaround time and is IP55 and saltwater resistant for outdoor environments.

SUB28 Web Link: https://www.1-sound.com/subwoofers#SUB28

Specifications:

Description:    Passive, discreet and compact subwoofer

Bandwidth:     45 Hz – 150 Hz (-6 dB preset dependent)

Max SPL:      125 dB

Power:    1400 watts (program), 700 watts (continuous)

Directivity:    omnidirectional

Elements :    (2) 8″ low frequency drivers

Impedance:   

Connectors:    (2) NL4

IP Rating:    IP55 indoor/outdoor and salt water resistant

Rigging:   (8) M8 points

Weight:    39.6 lbs / 18 kg

Construction:    Finland birch plywood (phenolic resin), three coats of polyurea, matte salt and UV resistant coating, A4 316 stainless steel hardware, 3D spacer mesh fabric

Accessories:    M8 Hanging Kit

Dimensions:    24.4” (620 mm) x 18.7” (475) x 7.95” (202 mm)

Colors:    Stocking black and white, custom colors and fabrics available